www.ATSeries.net

BATTERY CHARGER ONLINE TECHNICAL BINDER
 Product Operating Manuals and Standard Drawings

[Home] [Documentation Update History] [Custom Drawings]

Updated: Wednesday, June 14, 2006 (view updates)


STANDARD
DOCUMENT
TYPE
____________________


OPERATING
MANUAL

ELECTRICAL
CONTROL
DRAWINGS



ENCLOSURE
OUTLINE
DRAWING



INTERNAL
LAYOUT
DRAWING

 SALES
BROCHURE

PRODUCT LINE
AT10.1 SERIES
 (Group I - 1PH input)		 JA0102-01
(6-25 Adc)		 ELECTRICAL
DWGs		 OUTLINE
DWGs		 INTERNAL
DWGs		 coming soon...
AT10.1 SERIES
 (Group II - 1PH input)		 JA0102-02
(30-100 Adc)		 ELECTRICAL
DWGs		 OUTLINE
DWGs		 INTERNAL
DWGs		 coming soon...
AT30 SERIES
(3PH input)		 JA0102-03
(25-1,000 Adc)		 ELECTRICAL
DWGs		 OUTLINE
DWGs		 INTERNAL
DWGs		 coming soon...
AT SERIES
COMMUNICATIONS PCB		 JA0102-04 JE5107-00 see AT Series
chargers above		 JE5107-00 coming soon...
AT-DC SERIES
DC DISTRIBUTION PANEL		 JA0102-05 coming soon... coming soon... coming soon... coming soon...
AT SERIES
FORCED LOAD SHARING		 JA5054-00 coming soon... n/a coming soon... coming soon...

 

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

INSTRUMENT PANEL /
PC BOARD DETAIL		 MAINFRAME
SCHEMATIC		 CONNECTION
DIAGRAM
JE5030-10
STANDARD
W/O OPTIONS		 JE5031-00
STANDARD
W/O OPTIONS		 JE5033-00
STANDARD
W/O OPTIONS
JE5030-19
W/AUXILIARY ALARM
RELAY BOARD OPTION		 JE5031-99
WITH MAJORITY OF
COMMON OPTIONS		 JE5033-99
WITH MAJORITY OF
COMMON OPTIONS

DRAWINGS REVISED 10-08-2004

Note: As of July 2004, the rectifier assembly for the AT10.1 Group I battery charger has been upgraded.
The online electrical / control drawings listed above reflect the current configuration of the AT10.1 Group I
battery charger with this new assembly.  If you are interested in obtaining standard drawings for an AT10.1
Group I battery charger shipped prior to this date, please contact your sales representative. Legacy
documentation for the AT10.1 Series battery charger is always available for all configurations of this charger
line, dating back to its introduction in early 1996.

[TOP]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS (NEMA-1 / IP20 TYPE)

GROUP I
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc
6 Adc JE5023-00 JE5023-00 JE5023-00 JE5023-00
12 Adc JE5023-00 JE5023-00 JE5023-00 JE5024-00
16 Adc JE5023-00 JE5023-00 JE5024-00 JE5024-00
20 Adc JE5023-00 JE5023-00 JE5024-00 JE5024-00
25 Adc JE5023-00 JE5023-00 JE5024-00 JE5024-00
* NOTE: GROUP I AT10.1 SERIES BATTERY CHARGERS
FEATURE AN ADDITIONAL PENTHOUSE ENCLOSURE
WHEN CERTAIN OPTIONS ARE SUPPLIED (e.g. AUXILIARY
ALARM RELAY PC BOARD, 480 Vac INPUT, MED/HI AIC
CIRCUIT BREAKERS, etc.) PLEASE USE THE PRECEDING
DRAWINGS WITH THE "-01" EXTENSION IF APPLICABLE.
W/PENTHOUSE JE5023-01 * JE5024-01 *

ENCLOSURE OUTLINE DRAWINGS (NEMA-4/12/13 / IP5x TYPE)

AT10.1 SERIES GROUP I BATTERY CHARGERS ARE AVAILABLE
HOUSED IN A SPECIAL NEMA-4/12/13 TYPE ENCLOSURE.  PLEASE REFER
TO THE FOLLOWING OUTLINE DRAWING (JE5068-00) FOR DETAILS.

[TOP]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS

GROUP I
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc
6 Adc JE5027-00 JE5027-00 JE5027-00 JE5027-00
12 Adc JE5027-00 JE5027-00 JE5027-00 JE5027-00
16 Adc JE5027-00 JE5027-00 JE5027-00 JE5027-00
20 Adc JE5027-00 JE5027-00 JE5027-00 JE5027-00
25 Adc JE5027-00 JE5027-00 JE5027-00 JE5027-00

NOTE: THESE AT10.1 SERIES INTERNAL COMPONENT
LAYOUT DRAWINGS FEATURE ONLY STANDARD
COMPONENTS, AND MAY NOT REPRESENT YOUR
SPECIFIC UNIT.  PLEASE USE  THE FOLLOWING
DRAWINGS WITH THE "-99" EXTENSION TO VIEW
SIMILAR INTERNAL COMPONENT LAYOUT DRAWINGS
FEATURING ALL AVAILABLE OPTIONS. **
AT10.1 GROUP I JE5027-99 **

DRAWINGS REVISED 10-08-2004

Note: As of July 2004, the rectifier assembly for the AT10.1 Group I battery charger has been upgraded.
The online internal component layout drawings listed above reflect the current configuration of the AT10.1
Group I battery charger with this new assembly.  If you are interested in obtaining standard drawings for an
AT10.1 Group I battery charger shipped prior to this date, please contact your sales representative. Legacy
documentation for the AT10.1 Series battery charger is always available for all configurations of this charger
line, dating back to its introduction in early 1996.

[TOP]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

INSTRUMENT PANEL /
PC BOARD DETAIL		 MAINFRAME
SCHEMATIC		 CONNECTION
DIAGRAM
JE5030-20
STANDARD
W/O OPTIONS		 JE5032-00
STANDARD
 W/O OPTIONS		 JE5034-00
STANDARD
W/O OPTIONS
JE5030-29
W/AUXILIARY ALARM
RELAY BOARD OPTION		 JE5032-99
WITH MAJORITY OF
COMMON OPTIONS		 JE5034-99
WITH MAJORITY OF
COMMON OPTIONS

[TOP]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS (NEMA-1 / IP20 TYPE)

GROUP II
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc
30 Adc JE5025-00 JE5025-00 JE5025-00 JE5025-00
40 Adc JE5025-00 JE5025-00 JE5025-00 JE5026-00
50 Adc JE5025-00 JE5025-00 JE5025-00 JE5026-00
75 Adc JE5026-00 JE5026-00 JE5026-00 JE5026-00
100 Adc JE5026-00 JE5026-00 JE5026-00 N/A

ENCLOSURE OUTLINE DRAWINGS (NEMA-4/12/13 / IP5x TYPE)

AT10.1 SERIES GROUP I I BATTERY CHARGERS ARE AVAILABLE
HOUSED IN SPECIAL NEMA-4/12/13 TYPE ENCLOSURES.  PLEASE
REFER TO THE FOLLOWING OUTLINE DRAWINGS FOR DETAILS.

GROUP II
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc
30 Adc JE5073-00 JE5073-00 JE5073-00 JE5073-00
40 Adc JE5073-00 JE5073-00 JE5073-00 JE5074-00
50 Adc JE5073-00 JE5073-00 JE5073-00 JE5074-00
75 Adc JE5074-00 JE5074-00 JE5074-00 JE5074-00
100 Adc JE5074-00 JE5074-00 JE5074-00 N/A

[TOP]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS

GROUP II
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc
30 Adc JE5028-00 JE5028-00 JE5028-00 JE5028-00
40 Adc JE5028-00 JE5028-00 JE5028-00 JE5029-00
50 Adc JE5028-00 JE5028-00 JE5028-00 JE5029-00
75 Adc JE5029-00 JE5029-00 JE5029-00 JE5029-00
100 Adc JE5029-00 JE5029-00 JE5029-00 N/A

NOTE: THESE AT10.1 SERIES INTERNAL COMPONENT
LAYOUT DRAWINGS FEATURE ONLY STANDARD
COMPONENTS, AND MAY NOT REPRESENT YOUR
SPECIFIC UNIT.  PLEASE USE  THE FOLLOWING
DRAWINGS WITH THE "-99" EXTENSION TO VIEW
SIMILAR INTERNAL COMPONENT LAYOUT DRAWINGS
FEATURING ALL AVAILABLE OPTIONS. **
AT10.1 GROUP II JE5028-99 ** JE5029-99 **

[TOP]

AT30 SERIES BATTERY CHARGER
THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

PRELIMINARY
ELECTRICAL / CONTROL DRAWINGS

INSTRUMENT PANEL /
PC BOARD DETAIL		 MAINFRAME
SCHEMATIC		 CONNECTION
DIAGRAM
JE5091-30
STANDARD
W/O OPTIONS		 JE5092-00
STANDARD
 W/O OPTIONS		 SEE NOTE
BELOW OR
REQUEST
JE5091-39
W/AUXILIARY ALARM
RELAY BOARD OPTION		 JE5092-99
WITH MAJORITY OF
COMMON OPTIONS		 SEE NOTE
BELOW OR
REQUEST

 

Note: Standard wiring diagrams for all ratings and configurations of the AT30 Series Battery Charger
are not available at this time.  In lieu of these diagrams, we suggest you do the following:

1) review the available electrical schematics (JE5092-00 / JE5092-99) to familiarize
yourself with the circuitry of the AT30 Series Battery Charger

2) review the available internal component layout drawings to identify the physical
location of the components featured in the schematic by circuit symbol

3) download our standard AT30 wire list (EH5027-00) which lists every power and
signal wire in standard units and how they are interconnected in the AT30 Series
Battery Charger system

If this procedure does not meet your needs, a custom connection diagram is available upon request,
based upon any previously-supplied AT30 battery charger or AT30 battery charger quote.  Please
contact your sales representative with the serial number of the supplied unit, or the output rating and
specifications for the quote in question

[TOP]

AT30 SERIES BATTERY CHARGER
 THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

PRELIMINARY
ENCLOSURE OUTLINE DRAWINGS (NEMA-1 / IP20 TYPE)

AT30
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc
25 Adc N/A N/A N/A JE5085-00
30 Adc N/A N/A N/A JE5085-00
40 Adc N/A N/A N/A JE5085-00
50 Adc JE5085-00 JE5085-00 JE5085-00 JE5085-00
75 Adc JE5085-00 JE5085-00 JE5085-00 JE5085-00
100 Adc JE5085-00 JE5085-00 JE5085-00 JE5086-00
125 Adc JE5086-00 JE5086-00 JE5086-00 JE5086-00
150 Adc JE5086-00 JE5086-00 JE5086-00 JE5086-00
200 Adc JE5086-00 JE5086-00 JE5086-00 JE5086-00
250 Adc JE5086-00 JE5086-00 JE5086-00 JE5095-00 *
300 Adc JE5086-00 JE5086-00 JE5086-00 JE5095-00 *
400 Adc N/A JE5095-00 * JE5095-00 * JE5095-00 *
500 Adc N/A JE5095-00 * JE5095-00 * JE5096-00 **
600 Adc N/A JE5095-00 * JE5096-00 ** JE5096-00 **
800 Adc N/A JE5096-00 ** JE5096-00 ** JE5096-00 **
1,000 Adc N/A JE5096-00 ** JE5096-00 ** JE5096-00 **
AT30
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc

Comprehensive design information for the AT30
style-5031 * AND style-5034 ** enclosures is not
available at this time.  currently, Style-163 * And
Style-198 ** enclosures ARE substituted for Style-5031
and Style-5034 enclosures respectfully.  refer to
drawings je5095-00 * and je5096-00 ** FOR DETAILS.

ENCLOSURE OUTLINE DRAWINGS (NEMA-4/12/13 / IP5x TYPE)

AT30 SERIES BATTERY CHARGERS ARE AVAILABLE HOUSED IN SPECIAL
NEMA-4/12/13 TYPE ENCLOSURES.  PLEASE REFER TO THE TABLES ABOVE
AND SELECT THE CORRESPONDING OUTLINE DRAWING BELOW FOR DETAILS.

AT30 NEMA-1/IP20
ENCLOSURE TYPE
(see above rating)		 STANDARD
NEMA-1 / IP20
OUTLINE DRAWING		 CORRESPONDING
NEMA-4/12/13 / IP5x
OUTLINE DRAWING
STYLE-5018 JE5085-00 JE5074-00
STYLE-5030 JE5086-00 JE5108-00
STYLE-163 JE5095-00 * (REQUEST)
STYLE-198 JE5096-00 ** (REQUEST)

STANDARD DRAWINGS COMING SOON...

Note: Standard NEMA-4/12/13 enclosure outline drawings for all AT30 Series Battery Charger
models are not available at this time.  Please contact your sales representative for drawings not listed above.

[TOP]

AT30 SERIES BATTERY CHARGER
 THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS

AT30
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc
25 Adc N/A N/A N/A JE5088-00
30 Adc N/A N/A N/A JE5088-00
40 Adc N/A N/A N/A JE5088-00
50 Adc JE5088-00 JE5088-00 JE5088-00 JE5088-00
75 Adc JE5088-00 JE5088-00 JE5088-00 JE5088-00
100 Adc JE5088-00 JE5088-00 JE5088-00 JE5089-00
125 Adc JE5089-00 JE5089-00 JE5089-00 JE5089-00
150 Adc JE5089-00 JE5089-00 JE5089-00 JE5089-00
200 Adc JE5089-00 JE5089-00 JE5089-00 JE5089-00
250 Adc JE5089-00 JE5089-00 JE5089-00 JE5098-00 *
300 Adc JE5089-00 JE5089-00 JE5089-00 JE5098-00 *
400 Adc N/A JE5098-00 * JE5098-00 * JE5098-00 *
500 Adc N/A JE5098-00 * JE5098-00 * coming soon
600 Adc N/A JE5098-00 * coming soon coming soon
800 Adc N/A coming soon coming soon coming soon
1,000 Adc N/A coming soon coming soon coming soon
AT30
AMPERE RATING		 12 Vdc 24 Vdc 48 Vdc 130 Vdc

NOTE: THESE AT30 SERIES INTERNAL COMPONENT
LAYOUT DRAWINGS FEATURE ONLY STANDARD
COMPONENTS, AND MAY NOT REPRESENT YOUR
SPECIFIC UNIT.  PLEASE USE  THE FOLLOWING
DRAWINGS WITH THE "-99" EXTENSION TO VIEW
SIMILAR INTERNAL COMPONENT LAYOUT DRAWINGS
FEATURING ALL AVAILABLE OPTIONS. **
AT30 JE5088-99 JE5089-99 JE5098-99 * coming soon

[TOP]

[Home] [Documentation Update History] [Custom Drawings]