Welcome to the official web site of the

AT10.1/AT30 SERIES

MICROPROCESSOR-CONTROLLED
FLOAT BATTERY CHARGER

[Standard Charger Products]
[Electrical Features/Options] [Mechanical Options/Accessories]
[Service Instructions] [Application Notes] [Support Documents]
[AutoCAD] [Documentation Update History] [Custom Drawings]

Please note: to view the AT10.1/AT30 Series documentation on this site, you will need
Adobe Acrobat Reader 5.0 (or greater) which you can download for free at Adobe.com

SITE LAUNCH DATE
09/06/2005

Please bookmark this site and return to www.ATSeries.net as we post further information and
keep you updated on the world's most-trusted microprocessor-controlled stationary float battery charger

Updated: Thursday, January 26, 2012 (view updates)

STANDARD PRODUCT DOCUMENTATION

To better enable users to install, operate, and service their AT10.1 and AT30 Series battery chargers, we
have posted the Operating and Service Instruction manuals and Standard Drawings for reference.

STANDARD DOCUMENT TYPE	OPERATING MANUAL	ELECTRICAL CONTROL DRAWINGS	ENCLOSURE OUTLINE DRAWING	INTERNAL LAYOUT DRAWING	SALES BROCHURE
PRODUCT LINE
AT10.1 SERIES (Group I - 1PH input)	JA0102-01 (6-25 Adc) * (updated 01/24/2012)	ELECTRICAL DWGs	OUTLINE DWGs	INTERNAL DWGs	coming soon...
AT10.1 SERIES (Group II - 1PH input)	JA0102-02 (30-100 Adc) (updated 01/24/2012)	ELECTRICAL DWGs	OUTLINE DWGs	INTERNAL DWGs	coming soon...
AT30 SERIES (3PH input)	JA0102-03 (25-1,000 Adc) (updated 01/24/2012)	ELECTRICAL DWGs	OUTLINE DWGs	INTERNAL DWGs	coming soon...
AT Series Communications Module	JA0102-04 (updated 01/24/2012)	JE5107-00	n/a	JE5107-00	JF5026-00
AT-DC SERIES DC Distribution Panel	JA0102-05 (updated 01/24/2012)	JE5141-10 JE5141-20	JE5161-00	JE5141-10 JE5141-20	coming soon...
DC POWER ISOLATOR Steering Diode Assembly	JA5065-00	JE5139-00 JE5139-01 JE5139-02 JE5139-03	JE5138-00 JE5138-01 JE5138-02	JE5139-00 JE5139-01 JE5139-02 JE5139-03	coming soon...

* Note: In December 2001, the redesigned AT10.1 battery charger began shipping, replacing the old
AT10 product.  At that time, the AT10 operating manual was completely rewritten to reflect the new
design.  If you are still operating an older AT10 (not AT10.1) battery charger, you may download the
last revision of this product's operating manual (JA0102-00) for your records.

If you are interested in obtaining standard or custom drawings for an older AT10 or AT10.1 battery
charger, please contact your sales representative.  Legacy documentation for this product is always
available for all earlier configurations of the charger, dating back to its introduction in early 1996.

[TOP]

ELECTRICAL FEATURES AND OPTIONS

To better enable users to utilize certain features and options with their AT10.1 and
AT30 Series battery chargers that are not featured in the standard manuals, we have
posted the following Operating Instructions and Standard Drawings for your reference.

[TOP]

MECHANICAL OPTIONS AND ACCESSORIES

To better enable users to utilize certain features and options with their AT10.1 and
AT30 Series battery chargers that are not featured in the standard manuals, we have
posted the following Operating Instructions and Standard Drawings for your reference.

[TOP]

AT10.1/AT30 SERIES
BATTERY CHARGER SERVICE INSTRUCTIONS

To better enable users to service their AT10.1 and AT30 Series battery chargers, we have
posted the most commonly requested and most recently published Service Instructions.

[TOP]

AT10.1/AT30 SERIES
BATTERY CHARGER APPLICATION NOTES

To better enable users to understand the application of their AT10.1 and AT30 Series battery chargers,
we have posted the most commonly requested and most recently published Application Notes.

[TOP]

AT10.1/AT30 SERIES
BATTERY CHARGER SUPPORT DOCUMENTATION

Finally, we have posted a number of miscellaneous Support Documents for the AT10.1 and
AT30 Series battery chargers, which do not fit into any of the above categories.  Enjoy!

[TOP]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

If these standard documents do not meet your needs, a customized schematic and/or connection diagram
is available upon request, based upon any previously-supplied AT10.1 battery charger, or current battery
charger quote.  Please contact your sales representative with the serial number of the supplied unit, or the
ordering code and specifications of the quote in question.  Specifications are subject to change.

Note: In July 2004, the rectifier assembly for the AT10.1 Group I battery charger was redesigned.
The online electrical / control drawings listed above reflect the current configuration of the AT10.1 Group I
battery charger with this new assembly.  If you are interested in obtaining standard drawings for an
AT10.1 Group I battery charger shipped prior to this date, please contact your sales representative.
Legacy documentation for the AT10.1 Series battery charger is always available for all configurations
of this product, dating back to its introduction in early 1996.

[TOP]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS
(NEMA-1 / IP20 TYPE)

ENCLOSURE OUTLINE DRAWINGS
(NEMA-4/12/13 / IP5x TYPE)

AT10.1 SERIES GROUP I BATTERY CHARGERS ARE AVAILABLE
HOUSED IN A SPECIAL NEMA-4/12/13 TYPE ENCLOSURE.  PLEASE REFER
TO THE FOLLOWING OUTLINE DRAWING (JE5068-00) FOR DETAILS.

[TOP]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS

Note: In July 2004, the rectifier assembly for the AT10.1 Group I battery charger was been upgraded.
The online internal component layout drawings listed above reflect the current configuration of the AT10.1 Group I
battery charger with this new assembly.  If you are interested in obtaining standard drawings for an AT10.1
Group I battery charger shipped prior to this date, please contact your sales representative.  Legacy
documentation for the AT10.1 Series battery charger is always available for all configurations of this
charger line, dating back to its introduction in early 1996.

[TOP]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

If these standard documents do not meet your needs, a customized schematic and/or connection diagram
is available upon request, based upon any previously-supplied AT10.1 battery charger, or current battery
charger quote.  Please contact your sales representative with the serial number of the supplied unit, or the
ordering code and specifications of the quote in question.  Specifications are subject to change.

[TOP]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS
(NEMA-1 / IP20 TYPE)

ENCLOSURE OUTLINE DRAWINGS
(NEMA-4/12/13 / IP5x TYPE)

AT10.1 SERIES GROUP I I BATTERY CHARGERS ARE AVAILABLE
HOUSED IN SPECIAL NEMA-4/12/13 TYPE ENCLOSURES.  PLEASE
REFER TO THE FOLLOWING OUTLINE DRAWINGS FOR DETAILS.

[TOP]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS

[TOP]

AT30 SERIES BATTERY CHARGER
THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

If these standard documents do not meet your needs, a customized schematic and/or connection diagram
is available upon request, based upon any previously-supplied AT30 battery charger, or current battery
charger quote.  Please contact your sales representative with the serial number of the supplied unit, or the
ordering code and specifications of the quote in question.  Specifications are subject to change.

[TOP]

AT30 SERIES BATTERY CHARGER
 THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS
(NEMA-1 / IP20 TYPE)

ENCLOSURE OUTLINE DRAWINGS
(NEMA-4/12/13 / IP5x TYPE)

AT30 SERIES BATTERY CHARGERS ARE AVAILABLE HOUSED IN SPECIAL
NEMA-4/12/13 TYPE ENCLOSURES.  PLEASE REFER TO THE TABLES ABOVE
AND SELECT THE CORRESPONDING OUTLINE DRAWING BELOW FOR DETAILS.

* Note: AT30 outline drawings (JE5198-00 & JE5199-00) are of preliminary designs,
and are subject to change without notice.  Please contact your sales representative
with a request for quote on such large custom battery chargers.

[TOP]

AT30 SERIES BATTERY CHARGER
 THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS

[TOP]

AutoCAD (DWG) File Format Note

The manufacturer of AT10.1/AT30 Series battery charger products maintains a corporate policy of not
posting online e-files of the standard documentation on this site in AutoCAD (DWG or DXF) format.
If you wish to obtain any of the PDF files listed below, or a full  Customized Record Drawing Package
for your AT10.1/AT30 Series product, in a file format other than Adobe Acrobat (PDF), please contact
your Sales Representative for ordering information.

Please note: to view the AT10.1/AT30 Series documentation on this site, you will need
Adobe Acrobat Reader 5.0 (or greater) which you can download for free at Adobe.com

[TOP]

[Standard Charger Products]
[Electrical Features/Options] [Mechanical Options/Accessories]
[Service Instructions] [Application Notes] [Support Documents]
[AutoCAD] [Documentation Update History] [Custom Drawings]